Below are the instructions to set up the handset number assignment on a Gigaset N300 or N510 Base Station:


1. Register the handsets to the base station to do this please follow the steps below:



  • The phone will automatically show a screen saying 'Register' when you charge it and it first switch on.
  • Press the right hand arrow key on the silver square to access the menu options.
  • Next select the option Settings - this is shown as a spanner icon
  • Next select Handset and Registration
  • If asked to enter PIN enter 0000
  • You will see the message Base flash on the display screen of your phone
  • Go to the base station - within 60 seconds of pressing register on the phone, press and hold the registration/paging button for about 3 seconds. (The main blue button in the middle at the front of the base unit). 
  • The Phone screen should confirm it has been registered by displaying INT 1.
  • Now your handset will be registered and ready to use.




2. Next you will need to log in to the N300 / N510 base station - to do this please follow the steps below:



  • Access Settings on your phones handset by selecting the central button on your handset as shown below and selecting the Settings icon which is shown as a Spanner.


  • Scroll down to select the 'System' menu option. 
  • Select 'Local Network’
  • You should then see IP address which will be something like 192.168.0.5 …
  • Enter the IP address into the address bar of a web browser.  If you have any trouble getting the Gigaset web page to load try missing out the last 0 from your IP address. 

Please click here if you are unable to find your IP address using this above method as you can instead page the IP address to your phone from your Base Unit.

3. You will then be taken your Gigaset Base Station login as shown below the login screen asks for a password please enter 4 zeros (0000) and then click OK.


4. Navigate to the ‘Settings / Telephony / Number Assignment’ … here you will see your phone handsets:



5. For each handset you can choose which lines will ring on that handset – just click on the check boxes as shown above.


6. You can also select which line profile that handset will have when making calls – just select the line next to the handset you wish to make outgoing calls using.


7. When you are done – click “Set”


8. Click 'Log off' when you have finished.