To access some of your phones settings you may need to login to the Cisco web interface - do this by following the step by step instructions below:
1. Firstly you will need to find your IP address from your Cisco phone please do the following:
Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G, Cisco SPA512G, Cisco SPA514G:
a. Press the Setup button as shown below:
b. Scroll to network and press select
c. Scroll to View Current IP. This is the IP address of your phone
Cisco SPA501G:
a. Press the Setup button
b. Enter 110, then press #
c. The IP address is recited
Cisco SPA300 series:
To find the IP address on a Cisco SPA 300 series phone please press the Set Up button and then press 9 which will provide you with the IP address of your phone.
2. Enter the IP address into the address bar of a web browser - you will then be taken to the Cisco Configuration Utility page as shown below:
3. If you are not please check your IP address - try removing the last 'digit' from the address
4. If see a login window asking you for a user name or password enter this. (The default settings should allow you to login without the use of a username or password).
From here you can click on the 'Advanced' link in the top right-hand corner to access the Settings tab to view the settings of your phone.
For assistance please contact our Support Helpdesk.