Support

Please follow the steps below to register a Gigaset Dect phone with a Base Station:   1. To register your handset click on the right hand side of the silv...

Please note: your PC must be connected to the same network (router) as your phone in order for you to access the Gigaset phone web interface settings.  1...

Please check your public IP address that runs your VoIP lines - to do this - connect to that router on your PC and type into a browser search field 'Wha...

To alter which phones ring when calls come in please follow the steps below: 1. Find your VoIP IP address from the Settings menu on your handset by selec...

This may be because you do not have your correct VoIP extension number set up inside your Click2Call settings - you may have another extension line set up t...

Below are the instructions to set up the handset number assignment on a Gigaset N300 or N510 Base Station: 1. Register the handsets to the base station...

To switch off the auto answer on your Gigaset DECT handset so that you can only answer a call by pressing the green phone icon you need to go to the Setting...

Please find instructions below on how to switch off both the missed call flash alert and the voicemail flash alert from your Gigaset DECT phone: 1. From...

To change ringtone You can select different ringtones for internal and external calls from a choice of pre-loaded ringtones on your Gigaset Dect cordles...

To enable Gigaset Dect phones to be used in different locations throughout your offices you can use a repeater so it will pick up the signal strength at ran...